Gateways

Adding Gateways

This section contains instructions for adding Gateways in The Things Stack.

LoRa Basics™ Station

The LoRa Basics™ Station protocol simplifies management of large scale LoRaWAN networks. LoRa Basics™ Station is the preferred way of connecting Gateways to The Things Stack.

This section contains information for connecting your gateway to The Things Stack using LoRa Basics™ Station and its sub protocols.

Cisco Wireless Gateway for LoRaWAN

The Cisco Wireless Gateway for LoRaWAN technical specifications can be found in Cisco’s official documentation. This page guides you to connecting the gateway to The Things Stack. Prerequisites User account on The Things Stack with rights to create gateways. Cisco Wireless Gateway for LoRaWAN with latest firmware (version 2.0.32 or higher), connected to the internet (or your local network) via ethernet. Console cable from USB to RJ45. Registration Create a gateway by following the instructions for the Console or the CLI.

MikroTik Routerboard wAP LoRa8 kit

MikroTik Routerboard wAP LoRa8 kit is a LoRaWAN gateway that contains a pre-installed UDP packet forwarder and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet port that could be used as a backend. It’s technical specifications can be found in the official documentation. Note: This gateway does not currently support changing Frequency Plans. There are multiple interfaces to configure the gateway parameters. This page guides you to connect it to The Things Stack using a web browser or the MikroTik Mobile App for Android/iOS.

Kerlink Wirnet iStation

Kerlink Wirnet iStation is a LoRaWAN gateway, whose technical specifications can be found in the official documentation. This page guides you to connect it to The Things Stack. Prerequisites User account on The Things Stack with rights to create Gateways. Registration Create a gateway by following the instructions for Adding Gateways. Choose a Gateway ID and set EUI equal to the one on the gateway. Create an API Key with Gateway Info rights for this gateway using the same instructions.

Kerlink Wirnet Station

Kerlink Wirnet Station is a LoRaWAN gateway, whose technical specifications can be found in the official documentation. This page guides you to connect it to The Things Stack. Prerequisites User account on The Things Stack with rights to create Gateways. Kerlink Wirnet Station with Common Packet Forwarder installed and enabled and/or running firmware version 3.0 or higher. NOTE: Minimum CPF version tested is v1.1.6 Registration Create a gateway by following the instructions for Adding Gateways.

Laird Sentrius™ RG1xx LoRaWAN Gateway

The Laird Sentrius™ RG1xx is a secure, scalable, robust LoRaWAN-Enabled Gateway that supports Wi-Fi, Ethernet, and LTE backends.

This page contains information about connecting the Laird Sentrius™ RG1xx to The Things Stack

MultiTech Conduit AEP

The MultiTech MultiConnect® Conduit™ is a configurable, scalable cellular communications gateway for industrial IoT applications. The technical specifications of this Conduit can be found in the software guide in the official documentation page.

This guide will help you set up the Multitech Conduit gateway to communicate over The Things Stack.

NASys LoRaWAN Outdoor Gateway

NASys LoRaWAN Outdoor Gateway is an 8 Channel LoRaWAN gateway, whose technical specifications can be found in the official product page. This page guides you to connect it to The Things Stack. Prerequisites User account on The Things Stack with rights to create Gateways. NASys LoRaWAN Outdoor Gateway connected to the internet (or your local network) via ethernet. Registration Create a gateway by following the instructions for Adding Gateways.

Tektelic Kona Micro IoT LoRaWAN Gateway

Tektelic Kona Micro IoT LoRaWAN Gateway is an 8 channel LoRaWAN gateway, whose technical specifications can be found in the official documentation. This page guides you to connect it to The Things Stack. Prerequisites User account on The Things Stack with rights to create Gateways. Tektelic Kona Micro IoT LoRaWAN Gateway connected to the Internet via ethernet. Registration Create a gateway by following the instructions for Adding Gateways. The EUI of the gateway can be found on the back panel of the gateway under the field GW ID.

The Things Kickstarter Gateway

The Things Kickstarter Gateway is a LoRaWAN gateway, whose technical specifications can be found in the official documentation. This page guides you to connect it to The Things Stack. Prerequisites User account on The Things Stack with rights to create Gateways and API Keys. The Things Gateway running the latest firmware (a minimum of v1.0.8 is necessary). Registration Create a gateway by following the instructions for Adding Gateways. Choose a Gateway ID.

Ursalink UG8X IoT LoRaWAN Gateway

The Ursalink UG8X IoT LoRaWAN Gateway is an 8 channel (16 channel optional) configurable, scalable gateway for industrial IoT applications.

This page contains information about connecting the Ursalink UG8X IoT LoRaWAN Gateway to The Things Stack

Wifx LORIX One

The LORIX One is a robust and professional grade outdoor LoRaWAN® gateway in an ultra compact form factor, designed and assembled in Switzerland. The LORIX One supports ethernet, wireless, and cellular backhauls.

This page will guide you through the steps required to connect the gateway to The Things Stack.